After searching the web for simple software to use for converting data of different types in my Arduino development, I realized the Arduino itself is all I really needed! So here be a little sketch for converting arrays - Array Converter

Here’s the first working version of the Staccato guitar effect pedal. I ended up choosing the name based purely on sound description. It uses the Ampeg Scrambler distortion circuit and passes the signal through a Vactrol for a softened gating effect. Every time I try to record a sample of it in action, I end up playing around with it much longer than necessary. But this is a good sign.Controls from Left to right:Pots - Texture, Blend, Rate, WidthFootSwitches - Bypass/Power, Staccato-ON/OFFThere’s switch built into the texture pot that acts as a big ol’ gain boost as well as a DC Jack in the rear with reverse polarity protectionHere’s a sample I recorded off of a little practice amp I rescued from the dumpster. It starts off Dry, then uses the straight distortion, and finally, adds the staccato gating/tremolo effect:Staccato Proto sample AAC 1,009KB

I’ve just been appointed MAKE Flickr Pool Curator! I’m very psyched about this new role I’ll be fulfilling at makezine.com. I honestly couldn’t imagine a publication I’d want to work with more. I’ll be on the lookout for great projects in the pool and adding some hacks/how-to’s/how-not-to’s of my own as well. We’ll be upping the interactive ante with some contests and prizes for user projects. It’s a natural progression - MAKE shows people how to do cool things, people show make how to do cool things, repeat.

After viewing Johnny Lee’s incredible head tracking demonstration using the Wii hardware I had to experience it for myself. I had a pair of LED safety googles lying around and decided it was time to put them to better use.

Click each photo for more info.

I start with a tiny light dependent resistor and an amber 3mm LED (use a yellow LED if possible). These two are going to be good friends.

I pushed the LED and photoresistor flush together, then place the kissing components down on a bit of electrical tape.
Thus begins a very long staring contest.

Now roll the tape around a couple of times. Bend the component leads apart and press the tape together in between in order to keep light out.

I then take a thin strip of black tape and wrap it between the leads horizontally.

Squeeze around on the tape a bit in order to seal any openings. (Remember the round leads go to the resistor, the square-ish ones to the LED) You can check to see if there are leaks by hooking the resistor leads to a multimeter - in a dark room shine a flashlight on both ends of your new vactrol. If the flashlight changes the resistance reading on your meter then you have a leak and need to seal the package a bit more.

This is definitely a quick fix, (a sturdier vactrol should be constructed using epoxy or perhaps silicone adhesive) but I’ve found these to be a great way to control resistance. Just add a little LED flasher circuit and you’re good to go for all sorts of effect pedal, synth, and general electronics mods and designs.

PS - Here’s an LED flasher circuit:
blog.makezine.com/archive/2006/10/blinking_eyes_c.html

I’ve been working on a guitar effects pedal based around the rare and coveted Ampeg Scrambler. I used almost all the original components specified in the schematic and integrated a simple polarity protection for the DC jack. The biggest enhancement I’ve added is a sort of vibrato effect as an optional modifier to the texture control. I find the effect quite interesting, but I have a hunch there’s a simpler way to achieve it. Currently, I have a timer circuit driving a makeshift vactrol (LED taped to photoresitor). The main circuit’s texture control is then fed through the vactrol’s variable resistance. I’m concerned that driving the vactrol’s LED and 555 timer in addition to the rest of the pedal will create an impractical strain on battery life. Hmm, I should probably measure the circuit’s current consumption to learn more. More to come.

Here’s a shot of the first decorative accessory I made. Inspired by the Cybermen from the Doctor Who series, these are pretty simple and cute.

get it? Kind of like pronouncing “earrings” with a southern drawl? No? Whatev.Here’s a completed pair of the etched copper earrings I’ve been making. You can’t quite see it here but there’s a thick layer of hardened clear coat protecting the face. They became quite durable after a brief curing process. I should have a few pair up for sale @ Etsy soon.

Here are some shots of the etching process I use to make earrings. Unfortunately I was in such a hurry bringing them to La Superette that I neglected to photograph the final product. No biggie, another batch is on its way for Etsy.
I’ve been having some issues with bubble in the “window” transparency sheets I’ve been using to expose the boards. I think I’ll try straight up transparency sheets for the next round as adhesion doesn’t really seem necessary to the process.
The bandsaw my studiomate, John, recently purchased has been a huge help in cutting these boards. It’s hard to imagine I was previously used a dremel cut-off wheel. The bandsaw kicks up a lot less noxious dust and works much faster.

Building The OpenEEG

I’m currently working on building my very own EEG via instructions from the OpenEEG project. It’s a fascinating project to say the least. Above is a shot of one of the active electrodes I’m using with the project. These electrodes are then encased in silicone and wired to the main enclosure via shielded cable. I’ll have some readings/results posted as soon as I get some fine silver fashioned into a comfortable interface.